DJM Suspension - Products - 1998-2007 Ford Ranger

1998-2008 Ford Ranger

4\5" Ranger Slam Kit
DJM's Ranger 4/5 drop is one of our most popular kits. Using the same technology as our F150 Grand Slam, this kit allows a full 4" drop in front while maintaining factory ride and alignment. Using a lower control arm with a 2" coil achieves the 4" front drop. An upper control arm is required to correct the alignment. These control arms now include new upper and lower ball joints. The control arms replace the factory arms and install using factory hardware. No modifications to the truck are necessary. Control arm include urethane bushings, lower arms use DJM's exclusive twin tube sleeves. New front and rear shocks are required with this kit.

Lower Control Arm	Upper Control Arm

2" Front Springs	5" Rear Flip Kit


2\3" Ranger Kit
DJM has revised their '98 Ford Ranger 2/3 Kit. The original kit used a spring hanger kit, a time consuming installation. Now a flip kit and lifting shackle is used . This new rear kit is much easier to install and is about half the cost of hangers. The kit part number is still the same. DJM #K3098-2\3 includes front coil springs and rear flip kit. New front and rear shocks are required. This kit sells for about $470 complete with shocks.

2" Front Springs	3" Rear Flip Kit


Shocks	Frame Support

Application Guide
4" Front \ 5" Rear
1)CA3098L-4 1)CA3098U 1)CS3098-2 1)FK3098-5 2)1415 1)1800 1)1900	Lower Control Arms Upper Control Arms Front Coil Springs Rear Flip Kit Front Shocks Driver Rear Shock Passenger Rear Shock
2" Front \ 3" Rear
1)CS3098-2 1)FK3098-3 2)1415 1)1900 1)2100	Front Coil Springs Rear Flip Kit Front Shocks Driver Rear Shock Passenger Rear Shock