Search results for: spindles
1973 – 1987 C10 3″ Drop Spindles (1.0″ Rotor)
Some say their the “Grandaddy” of lowering parts. The magazines said DJM makes “The Toughest Aftermarket Spindles in the Business”
Read MoreDrop Spindles
While control arms might be considered the horizontal members of the front end, spindles would be the vertical member that ties the control arms together. Both upper and lower control arms attach themselves through ball joints to the spindle. This is a cast iron part where the machined “axle” is located. The wheel bearings and brake rotors…
Read More2015 Silverado/Sierra Spindle Chart
All 2015 (and some 2014 4×4 and early 2016) Silverado/Sierra’s come with one of two spindle types. You need to check which kind you have to ensure you get the correct products. Its easy to choose! Just locate your spindle and put a magnet to it. (see chart below) If the magnet sticks to the…
Read More1982-2004 S10/S15 Pick UP 2 inch Front / 3 inch Rear Complete Lowering Kit (Spindle)
1982-2004 S10/S15 Pick UP 2 inch Front / 3 inch Rear Complete Lowering Kit (spindle) Lowering spindles with factory springs for a 2 inch front drop and a 3 inch lowering block kit in the rear. Note: On the newer S-10’s Chevy may have used a “steering knuckle” instead of a spindle. Make sure your…
Read More1995-1999 Chevy Tahoe(4 Door) 1992-1999 Chevy Suburban 2 inch Front / 3 inch Complete Rear Lowering Kit
11995-1999 Chevy Tahoe(4 Door) 1992-1999 Chevy Suburban 2 inch Front / 3 inch Complete Rear Lowering Kit Drop spindles lower the front 2 inches with a 3 inch lowering hanger and shackle kit for the rear. Shock are Not included with this kit. DJM recommends: Front shock number 1315 (sold each) Rear shock number 2100…
Read More1970 C-10
A 1970 Chevy C-10 that was in rough shape is the project vehicle here. It was a long bed, which was shortened to a short bed sometime in the past. The transmission had a cracked fitting, leaking ATF, the rear brake drums had to be cut off. So there was a lot to do to…
Read More