2001 – 2006 Avalanche/Suburban 3inch front/ 3inch rear Lowering Kit
From: $1,034.83
Works on both 2WD & 4WD!
Upper Control Arms Included
Don’t want the slammed look? This 3/3 kit gives you the stance you want. Great choice for the family cruiser.
Description
To get serious lowering going on, use Calmax control arms up front which keep the factory spring rate and load on your torsion bars while lowering 3". Drop coils replace the factory springs in the rear for a 3" drop. A rear kit includes brackets and hardware to keep the trailing arms away from the frame and positions the factory sway-bar so it can move freely with out contact by including offset swaybar endlinks! Learn more about how complete kits are important for you, click here for article at DJM University. Also learn more about Control Arms and Rear Kits at DJM University. Bonus - Click for more information on Calmax Anti Sway-Bars.
This is the same kit as the DJM2000-3/3Â PLUSÂ Calmax Upper Control Arms
Recommended parts
Replacement parts
Additional information
2001–2006 Avalanche, Tahoe and Suburban Lowering Control Arm (Drivers Side)
| Weight | 25 lbs |
|---|
2001-2006 Avalanche, Tahoe and Suburban Lowering Control Arm (Passengers Side)
| Weight | 25 lbs |
|---|
2000-2006 Tahoe/Yukon, Silverado/Sierra, Suburban/Yukon XL, Avalanche Upper Control Arms for Torsion Bar Front End
| Weight | 20 lbs |
|---|
2000–2006 Avalanche, Tahoe and Suburban Rear Lowering Hardware Kit
| Weight | 20 lbs |
|---|
2001-2006 Avalanche, Tahoe and Suburban 3 Inch Rear Lowering Coil Springs
| Weight | 20 lbs |
|---|
13.5″ Stem / Loop SuperShock (1315)
| Weight | 3 lbs |
|---|
20.5″ Loop/Loop SuperShock (2000)
| Weight | 3 lbs |
|---|
