1973 – 1987 Chevy/GMC C10 5inch Front/5inch Rear Lowering Kit (1.25 inch rotor)

$891.05

Note:  This kit works with 1.25 inch rotors only.

1973 - 1987 C10 3 Inch Drop Spindles (1.25 Inch Rotor)

1963 - 1987 C-10 2″Front Lowering Coil Spring

If your tempted to cut or heat your springs to save a buck, good luck. They always hang out with their best friends horrible ride and bad alignment. Springs that are designed on purpose to lower your truck are not so expensive that you have to hang out with horrible ride and bad alignment too!

In stock

1973-1987 C10 5 inch Rear Flip Kit with New U-bolts and Spring Plates

13.5″ Loop / Loop SuperShock (1309) × 2

13.5″ Loop / Loop Calmax SuperShock Twin tube nitrogen charged shock for lowered and performance trucks Sold each! Extended - 13.5" Collapsed - 9.25"

$49.95 each

21.5″ Loop/ Loop SuperShock (2100) × 2

21.5″ Loop/ Loop Calmax SuperShock
Twin tube nitrogen charged shock for
lowered and performance trucks
Sold each!

Extended - 21.5"  Collapsed - 13.25"

$49.95 each
SKU: DJM2045H-5/5 LTD (1.25"rotor) Categories: , ,

Description

You will have either a 1 inch or 1.25 inch rotor. If you have a 1″ rotor use (DJM2045L-5/5).  The 3 inch lowering spindle combined with a set of 2 inch engineered springs will lower the front about 5 inches total.

 

The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required and there are new U-bolts and leaf spring plates included to replace the original parts if they need to be replaced.

Shocks are NOT included. DJM recommends:

  • Front Shock 1309 (Sold Each)
  • Rear Shock 2100 (Sold Each)

Additional information

1973 - 1987 C10 3 Inch Drop Spindles (1.25 Inch Rotor)

Weight 45 lbs

1963 - 1987 C-10 2″Front Lowering Coil Spring

Weight 20 lbs

1973-1987 C10 5 inch Rear Flip Kit with New U-bolts and Spring Plates

Weight 10 lbs

13.5″ Loop / Loop SuperShock (1309)

Weight 3 lbs

21.5″ Loop/ Loop SuperShock (2100)

Weight 3 lbs

Related products