Sale!
DJM2507-34v2

DJM2515-3/5

$899.83 $719.86

Forecast – Wild trending toward mild, lots of Cool, Smooth Ride ahead

click for details

 

Product Description

2007 - 2015 Chevy Silverado / Sierra Complete 3/5 DJM Kit with Cast Alumnum Spindles - 2016/2017 Silverado

2WD only - not intended for 4WD platform
2014 and 2015 Silverado's come from the factory 2 ways, either with cast iron steering knuckles or cast aluminum steering knuckles. It is important to know what you have, before you order your parts. Click on the images below to help you identify your spindle!
*** IF YOU HAVE A 2016/2017 SILVERADO NO NEED TO WORRY ABOUT THIS KNUCKLE ISSUE, THESE ARE THE RIGHT PARTS FOR YOU!

So, how can I find out which spindle I have? Probably the easiest way is to turn your steering wheel all the way to the left (drivers side), should look like the image above,  find your spindle. If it is dark, a little rusty looking it is a cast iron spindle. If it is silvery or shiny it is a aluminum spindle. If you have any doubt get another opinion or ask you mechanic.   

It's Easy to Choose!

Have cast aluminum spindles on your 2014/15? You're in the right place! Have Cast Iron spindles?   Click here DJM2507-2/3 for the correct kit!

If you have a 2016/17 Silverado this is the correct kit

You want the Deep Drop, like in the weeds kinda drop, right? You know of course there will be sacrifices made, right. The big sacrifice here? Your three inches closer to the ground, still sporting the factory coil springs and able to set your alignment to factory specs, not much of a sacrifice! Calmax Control Arms make this possible, you just can't get that with spindles and springs. If you could we would build it. Upper and lower control arms are the key, this set of arms allowed us to build you a 3" drop around the factory strut that retains full suspension travel and factory ball joint angles. Ball joints move freely without binding and your able to dial in the factory alignment specs! You'll love they way you look!

 

The rear kit consists of an axle flip kit featuring those DJM exclusive pinion adjustable axle brackets and new shackle hangers that invert the shackle mounting point allowing the longer shackles included to lift the rear end to the five-inch drop position.

 

(A clever way to get around those welded hangers!)

CALMAX Front Shocks

CALMAX Control Arms often allow you to keep your factory shocks! Here you can keep and DON"T have to modify your factory strut!!

CALMAX Rear Shocks

CALMAX SuperShocks are the best choice for your project. Here you can choose the correct rear shock to work with these DJM parts 

Why are Complete Kits Important?

  Johnny Cash wrote a song about collecting a bunch of good working parts that were not designed to work together and found it doesn’t always end well! Don’t believe me, click up there! (Turn up your speakers) You can build a radical engine by combining parts made by different manufactures but you really have […]

Read More

Calmax Control Arms

Control arms or “A” arms or maybe “wishbones” are the components that attach the spindle/brake assembly to the frame. In almost every case there is an upper and lower arm. The lower arm is the big one, supporting the weight of the front end through a spring or torsion bar. The lower arm is where […]

Read More

Flip Kits

The first thing to get off the table regarding “flip kits” is nothing is actually flipped! Simply put a flip kit moves the axle from beneath the leaf spring to on top of the leaf spring. The devil is in the details here and how its done is very important. When you place your axle […]

Read More
genuine_trans_600

    Additional Information

    Weight 70 lbs

    Reviews

    There are no reviews yet.

    Be the first to review “DJM2515-3/5”

    Your email address will not be published. Required fields are marked *