Yep, there is a 4 Door slam kit, a 4/4 drop kit with 2″ coil springs combined with 2″ drop spindles gets your 4″ front drop. You can still set the alignment to the GM numbers and you have a great ride!
The rear is a flip kit that will only work on a 2 Door model. It features DJM’s exclusive pinion adjustable axle brackets and frame supports for that “C-section” along with leaf spring hangers to lift the Tahoe back up a little to net out your 4″ drop. You still have plenty of travel for a smooth ride and a 4/4 drop on your Tahoe will turn heads!
CALMAX SuperShocks are the best choice for your project. Here you can choose the correct front shock to work with these DJM parts. The 4 inch front drop means you need a shorter shock. Calmax Supershock part number 1415 is the perfect choice!
In case your wondering why 2 different shock part numbers in the rear? Your factory shock mounts are staggered, one in front and one behind the rear axle, since your going to the trouble to lower why not have the optimum length shock for each side! Calmax Supershock number 1700 is for the drivers side.
In case your wondering why 2 different shock part numbers in the rear? Your factory shock mounts are staggered, one in front and one behind the rear axle, since your going to the trouble to lower why not have the optimum length shock for each side! Calmax Supershock number 1800 is for the passenger side.
Johnny Cash wrote a song about collecting a bunch of good working parts that were not designed to work together and found it doesn’t always end well! Don’t believe me, click up there! (Turn up your speakers) You can build a radical engine by combining parts made by different manufactures but you really have […]
While control arms might be considered the horizontal members of the front end, spindles would be the vertical member that ties the control arms together. Both upper and lower control arms attach themselves through ball joints to the spindle. This is a cast iron part where the machined “axle” is located. The wheel bearings and brake rotors […]
The first thing to get off the table regarding “flip kits” is nothing is actually flipped! Simply put a flip kit moves the axle from beneath the leaf spring to on top of the leaf spring. The devil is in the details here and how its done is very important. When you place your axle […]