Sale!

DJM2029-2/3

$504.55 $403.75

Mild, classic spindle and hanger shackle kit for the Classic Suburban/Tahoe platform

click for details

Description

1992 – 1999 Chevy Suburban /Tahoe (95-99 4dr only) 2/3 Complete Lowering Kit by DJM

Front Spindles / Rear Hanger & Shackle Kit  NOTE: FITS TAHOE 4 DOOR ONLY!

A better way to achieve a 2/3 drop is with this kit where drop spindles are used in the front rather than coil springs. Why is this better? Great Question!

 

For a little extra cost you can avoid the only negative aspect of coil springs the loss of suspension travel. Drop Spindles lower the truck by moving the “axle” part up in the casting and if you keep the factory spring your ride quality won’t change one iota.

 

Our 3″ hanger / shackle kit for the rear is used in this kit because it’s value just can’t be beat! Your just moving the rear leaf spring up on the frame where there is plenty of room.

CALMAX Front Shocks

CALMAX SuperShocks are the best choice for your project. Here you can choose the correct front shock to work with these DJM parts. The 2 inch front drop means you need a shorter shock. Calmax Supershock part number 1315 is the perfect choice! 

CALMAX Rear Shocks

CALMAX SuperShocks are the best choice for your project. Here you can choose the correct rear shock to work with these DJM parts. The 3 inch rear drop means you need a shorter shock. Calmax SuperShock part number 2100 is the perfect choice! 

Why are Complete Kits Important?

  Johnny Cash wrote a song about collecting a bunch of good working parts that were not designed to work together and found it doesn’t always end well! Don’t believe me, click up there! (Turn up your speakers) You can build a radical engine by combining parts made by different manufactures but you really have […]

Drop Spindles

While control arms might be considered the horizontal members of the front end, spindles would be the vertical member that ties the control arms together. Both upper and lower control arms attach themselves through ball joints to the spindle. This is a cast iron part where the machined “axle” is located. The wheel bearings and brake rotors […]

Hangers and Shackles

Rear leaf spring shackles are commonly used to “Level” trucks. For those of you who just can’t stand the “stink bug” look of factory stances, the lowering shackle is for you! Typical drop is two inches and fairly simple to install. You simply remove the factory shackle and replace it with a longer drop shackle. […]

genuine_trans_600

    Additional information

    Weight 40 lbs