1973 – 1987 C10 Complete 5 Inch/5 Inch Kit (1.25″rotor)

From: $638.20

A classic way to lower a classic truck!. Spindles, springs and flip kit! Been working for years.

1.25 Rotar Only

 

1973 - 1987 C10 3 Inch Drop Spindles (1.25 Inch Rotor)

1963 - 1987 C-10 2″Front Lowering Coil Spring

If your tempted to cut or heat your springs to save a buck, good luck. They always hang out with their best friends horrible ride and bad alignment. Springs that are designed on purpose to lower your truck are not so expensive that you have to hang out with horrible ride and bad alignment too!

In stock

1973-1987 C10 5 inch Rear Axle Flip Kit

14.5″ Loop / Loop SuperShock (1409) × 2

14.5″ Loop / Loop Calmax SuperShock
Twin tube nitrogen charged shock for
lowered and performance trucks
Sold each!

Extended - 14.5" Collapsed - 9.25"

21.5″ Loop/ Loop SuperShock (2100) × 2

21.5″ Loop/ Loop Calmax SuperShock
Twin tube nitrogen charged shock for
lowered and performance trucks
Sold each!

Extended - 21.5"  Collapsed - 13.25"

SKU: DJM2045H-5/5 Categories: , , ,

Description

The good old drop spindle, as classic as the truck it’s self, sports a 3″ drop in the front. Whats important here is to be sure to measure the width of your brake rotor. You will have either a 1″ or 1.25″ rotor. If you have a 1″ rotor use (DJM2045L-5/5). Pair the spindles up with a set of 2" engineered DJM drop springs, combined you end up with about 5" of total drop in the front!

 

The rear is a simple flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required on your C-10 because the frame has plenty of relief built in and even though you’ve “flipped it you still have plenty of travel! Tech Tip: If your U-bolts are in bad shape, a very real possibility on a 30 - 40+ year old truck, you may consider this kit DJM2045H-5/5LTD. Same as this kit with a flip kit that includes new U-bolts and leaf spring spring plates!

Recommended parts

Additional information

1973 - 1987 C10 3 Inch Drop Spindles (1.25 Inch Rotor)

Weight 45 lbs

1963 - 1987 C-10 2″Front Lowering Coil Spring

Weight 20 lbs

1973-1987 C10 5 inch Rear Axle Flip Kit

Weight 10 lbs

14.5″ Loop / Loop SuperShock (1409)

Weight 3 lbs

21.5″ Loop/ Loop SuperShock (2100)

Weight 3 lbs

Related products