f you don't want your HD to set on the ground then this is the kit for you. The front is lowered 3" by using Calmax Control Arms, just remove and replace the factory arms! Your sporting urethane bushings and brand new all steel ball joints with a 3" drop where the factory spring rate in your torsion bars are retained and a factory ride is preserved. Ball joint angles and alignment are also set right!
Setting the rear in proper alignment with the front a 5" Hanger/Shackle kit is employed. The rear leaf spring is moved up on the frame using the brackets in the kit. To avoid an especially bad installation situation, take a peek at your factory leaf spring eye hangers and make sure they match the look of the picture below! All the 2500/3500 Short Bed HD's we've seen use this part but to make double dang sure you have the right parts, a quick inspection before you order can save you from finding out you don't have the right parts when you need them most!
CALMAX SuperShocks are the best choice for your project. Here you can choose the correct front shock to work with these DJM parts. The 6 inch front drop means you need a shorter shock. Calmax Supershock part number 1415 is the perfect choice!
In case your wondering why 2 different shock part numbers in the rear? Your factory shock mounts are staggered, one in front and one behind the rear axle, since your going to the trouble to lower why not have the optimum length shock for each side! Calmax Supershock number 2200 is for the drivers side.
In case your wondering why 2 different shock part numbers in the rear? Your factory shock mounts are staggered, one in front and one behind the rear axle, since your going to the trouble to lower why not have the optimum length shock for each side! Calmax Supershock number 2400 is for the passenger side.
Johnny Cash wrote a song about collecting a bunch of good working parts that were not designed to work together and found it doesn’t always end well! Don’t believe me, click up there! (Turn up your speakers) You can build a radical engine by combining parts made by different manufactures but you really have […]
Control arms or “A” arms or maybe “wishbones” are the components that attach the spindle/brake assembly to the frame. In almost every case there is an upper and lower arm. The lower arm is the big one, supporting the weight of the front end through a spring or torsion bar. The lower arm is where […]
Rear leaf spring shackles are commonly used to “Level” trucks. For those of you who just can’t stand the “stink bug” look of factory stances, the lowering shackle is for you! Typical drop is two inches and fairly simple to install. You simply remove the factory shackle and replace it with a longer drop shackle. […]