1999–2006 Chevy Silverado/GMC Sierra Drive Line Carrier Bearing Adjustment Bracket
$38.86
Description
1999–2006 Chevy Silverado / GMC Sierra Drive Line Carrier Bearing Adjustment Bracket
Eliminates Low-Speed Vibration | Restores Driveshaft Angles | Easy Bolt-On Fix
Fix driveline vibration after lowering your truck with a simple, proven solution. With DJM Suspension’s carrier bearing bracket kit, you can easily restore a Chevy Silverado or GMC Sierra to a smoother, more controlled ride. It’s designed with demanding usage in mind, using high-quality materials.
If your lowered Chevy Silverado or GMC Sierra has a two-piece driveshaft, you may feel vibration during takeoff. This carrier bearing adjustment bracket corrects that issue by repositioning the bearing and restoring proper driveline angles.
It’s a simple fix that brings back smooth performance without major modifications. You can install it easily, and it works with your factory setup.
This carrier bearing drive shaft bracket:
- Corrects driveline vibration
- Works with 2-piece driveshaft
- Simple bolt-on installation
Why Buy from DJM Suspension
Built for Lowered Trucks
Every part is designed with lowered truck applications in mind. You get components that work with your setup, not against it.
Proven Real-World Solution
All our products, including this carrier bearing bracket, solve common problems many truck owners face. It delivers results you can feel on the road.
Easy Installation
You can install this carrier bearing bracket with basic tools. The straightforward design saves time and gets your truck back on the road quickly.
About DJM Suspension
DJM Suspension builds parts for drivers who care about performance and stance. Our company was started in Southern California and has led the lowering market since the 1970s. As a family-owned American manufacturer, we always focus on quality, fit, and on-the-road results for truck owners.
Frequently Asked Questions
Get Back to a Smooth Ride
Do you notice vibration during acceleration after lowering? Fix it immediately and enjoy a cleaner, smoother drive with a simple upgrade. Order your carrier bearing bracket now!
Additional information
| Weight | 2 lbs |
|---|
Carrier Bearing Bracket
Important — Read Before Installing
Hardware Parts List
- 1 Carrier Bearing Bracket
- 2 3/8" x 3-1/2" Bolts with Nuts and Washers
Installation Procedure
The bearing is welded to a round cross member and will need to be cut off and moved up. Cut the stock bracket off the cross member.
Place the new bracket on the carrier bearing and position it on the cross member at the new location. Mark the center of the slotted hole and drill through the cross member with a 3/8" bit.
Bolt the bracket to the cross member and to the carrier bearing and tighten. You can adjust the bracket up or down if needed using the slotted hole.