Sale!

DJM3006-3/4

$995.38 $796.30

The only kit for 1980-1981 F100’s. If you have a king pin truck with unequal length beams this is the kit for you! click for details

Category:

Description

1980 – 1981 Ford F-100 3/4 Complete Lowering kit by DJM

2 WD King-pin trucks only, note: Use Moog King-pin part number 8551B
Outside diameter of .8593" length should be 6.670" 

In 1965 Ford announced to the world “Twin I-Beams”. This new suspension design is still in use today on Fords very popular “Superduty” line, but it all started here with the 1965 F-100. In 1980 Ford redesigned the beams to be two different lengths, this is very important to check before you order. Make sure your beams are unequal length!! This 3/4 kit uses our “Dream Beams” which give you a 3″ drop by simply removing the factory beam and replacing it with our new Dream Beam!

 

The rear is lowered with a hanger / shackle kit that yields a full 4″ drop. Just moving the leaf spring up on the frame is how this works. You won’t believe the stance of your “effie” after you install this kit and neither will your friends!

 

 

CALMAX Front Shocks

CALMAX SuperShocks are the best choice for your project. Here you can choose the correct front shock to work with these DJM parts 

CALMAX Rear Shocks

CALMAX SuperShocks are the best choice for your project. Here you can choose the correct rear shock to work with these DJM parts On your F100 you will have one of two different mounts on your rear shocks: here is the loop/loop type shock part number 1900. Be sure and identify what type of shock mount you have before you order!  

CALMAX Rear Shocks

CALMAX SuperShocks are the best choice for your project. Here you can choose the correct rear shock to work with these DJM parts On your F100 you will have one of two different mounts on your rear shocks: here is the stem/loop type shock part number 1910. Be sure and identify what type of shock mount you have before you order!  

genuine_trans_600