Search results for: spindles
1988-1998 C1500 Silverado/Sierra 4 inch Lowering Control Arms
1988-1998 Silverado/Sierra 4 inch Lowering Control ArmsNote: Use only with 2 inch lowering coil springs CS2351-2. These control arms are designed to work with lowering coil springs CS2351-2 for a total 4 inch drop. Clearance problems caused by lowering spindles are eliminated. We shift the ball joint angles, sway bar end link mounting points, bump…
Read More1988-1998 C1500 Silverado/Sierra 3 inch Lowering Control Arms
1988-1998 C1500/Silverado/Sierra 3 inch Lowering Control Arms (Lower Arms Only)Lowering control arms with factory coils that drop the front 3 inches with only lower control arms, and solve the wheel clearance problems caused by drop spindles. Like spindles you keep your full suspension travel and run any wheel & tire combo that is designed for…
Read More1988-1998 C1500 Silverado/Sierra 2 inch Lowering Control Arm
1988-1998 C1500/Silverado/Sierra 2 inch Lowering Control ArmsThese lowering control arms drop the front 2 inches like spindles but, unlike spindles, you can run any wheel & tire combo that is designed for a C1500. New ball joints, urethane bushings and “twin tube” pivot sleeves are installed and packaged with new sway bar end-links. Sold in…
Read More1988-1999 C1500 Silverado/Sierra 2 inch drop coil springs
1988-1998 Chevy/GMC C1500 Silverado/Sierra 1995-1999 Tahoe/Yukon/Suburban 2 inch drop coil springsCoil springs are the most cost effective way to lower most trucks and SUV’s. They can be used to lower from as little as 1” to as much as 5” depending on applications. DJM Coils are computer tested and paired up to give you the…
Read More1988-1998 C1500 Silverado/Sierra 2 inch Drop Spindle (Not for 88-91 Single Cab)
1988-1998 Chevy/GMC C1500 Silverado/Sierra Drop Spindle SetNote: This is different from 88-91 C1500 Standard Cabs which use part DS2055-2 . This is a 2 inch drop spindle designed specifically for the 92 – 98 Chevy C1500. To be specific this spindle has a spud (axle) length of 4.5 inches and requires the inner wheel bearing…
Read More1982–2004 S-10/S-15 & 1982-2003 Blazer/Jimmy 3 inch Lowering Coil Spring Set
1982–2004 S-10/S-15 & 1982-2003 Blazer/Jimmy 3 inch Lowering Coil Spring Set3 inch lowering coils springs computer tested and paired up to give you the most consistent drop you can have with a spring. Coils can be used in combination with spindles and control arms for more lowering. Recomended part: Shock 1315 Instructions
Read More