1973 – 1987 C10 Complete 3 Inch Front/5 Inch Rear Kit (1.25″ rotor)
$649.25
A classic way to lower a classic truck!. Spindles, springs and flip kit! Been working for years.
Description
The good old drop spindle, as classic as the truck it’s self, sports a 3″ drop in the front. Whats important here is to be sure to measure the width of your brake rotor. You will have either a 1″ or 1.25″ rotor. If you have a 1″ rotor use (DJM2045L-3/5).
The rear is a simple flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required on your C-10 because the frame has plenty of relief built in and even though you’ve “flipped it you still have plenty of travel! Tech Tip: If your U-bolts are in bad shape, a very real possibility on a 30 - 40+ year old truck, you may consider this kit DJM2045H-3/5LTD. Same as this kit with a flip kit that includes new U-bolts and leaf spring spring plates!
Recommended parts
Additional information
1973 - 1987 C10 3 Inch Drop Spindles (1.25 Inch Rotor)
| Weight | 45 lbs |
|---|
1973-1987 C10 5 inch Rear Axle Flip Kit
| Weight | 10 lbs |
|---|
14.5″ Loop / Loop SuperShock (1409)
| Weight | 3 lbs |
|---|
21.5″ Loop/ Loop SuperShock (2100)
| Weight | 3 lbs |
|---|
