1973-1987 C10 Complete 3 inch Front / 5 inch Rear Lowering Kit (For 1.25 inch brake rotors)
$737.75
Description
1973-1987 C10 Complete 3 inch Front / 5 inch Rear Lowering Kit (For 1.25 inch brake rotors)
Note: For trucks with 1.25 inch thick brake rotors. If you have a 1 inch rotor use (DJM2045L-3/5).
Drop spindles are used to lower the front 3 inches. The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required and there are new u-bolts and leaf spring plates included to replace the original parts if they need to be replaced.
Shock are included with this kit. DJM recommends:
Additional information
1973 - 1987 C10 3 Inch Drop Spindles (1.25 Inch Rotor)
| Weight | 45 lbs |
|---|
1973-1987 C10 5 inch Rear Flip Kit with New U-bolts and Spring Plates
| Weight | 10 lbs |
|---|
14.5″ Loop / Loop SuperShock (1409)
| Weight | 3 lbs |
|---|
21.5″ Loop/ Loop SuperShock (2100)
| Weight | 3 lbs |
|---|
