1973 – 1987 Chevy/GMC C10 5inch Front/5inch Rear Lowering Kit (1.25 inch rotor)
Note: This kit works with 1.25 inch rotors only.
You will have either a 1 inch or 1.25 inch rotor. If you have a 1″ rotor use (DJM2045L-5/5). The 3 inch lowering spindle combined with a set of 2 inch engineered springs will lower the front about 5 inches total.
The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required and there are new U-bolts and leaf spring plates included to replace the original parts if they need to be replaced.
Shocks are NOT included. DJM recommends:
1973 - 1987 C10 3 Inch Drop Spindles (1.25 Inch Rotor)
1963 - 1987 C-10 2″Front Lowering Coil Spring
1973-1987 C10 5 inch Rear Flip Kit with New U-bolts and Spring Plates
13.5″ Loop / Loop SuperShock (1309)
21.5″ Loop/ Loop SuperShock (2100)