$1,161.29 $1,024.25

It’s the Big Daddy Ford and here is the Big Daddy Drop!

click for details


If you try to lower Super Duty with springs you get trouble, if you heat or cut your springs, even if you use a "lowering" spring you cause alignment issues you just can't correct out!  That's why we made DreamBeams! Our exclusive tubular construction is the most accurate lowering beam anywhere. We use thick walled DOM tubing, nested, welded in the fixture giving you full alignment adjustment. The fabricated "I-beam" type parts suffer from "weld creep" as they are welded, which simply means they warp a little. That makes it hard to get consistent finished parts! You only need to remove the factory beams and replace with DreamBeams and you have a 3" drop with the factory coils, full suspension travel and all the goodness that comes with that.

The rear end is done with a tried and true Hanger/Shackle kit. This moves the mounting points of the leaf springs up on the frame providing the lowering needed to match the front!  A bolt on 3/5 kit for your SuperDuty, simple installation is a DJM trait.

CALMAX Front Shocks

CALMAX SuperShocks are the best choice for your project. Here you can choose the correct front shock to work with these DJM parts. Use Part number 1415 

CALMAX Rear Shocks

CALMAX SuperShocks are the best choice for your project. Here you can choose the correct rear shock to work with these DJM parts. use part number 2000 


Why are Complete Kits Important?

  Johnny Cash wrote a song about collecting a bunch of good working parts that were not designed to work together and found it doesn’t always end well! Don’t believe me, click up there! (Turn up your speakers) You can build a radical engine by combining parts made by different manufactures but you really have […]

Dream Beams

What are Dreambeams? Ford I-Beam trucks have a much different suspension than most other trucks. Spindles are non-existent for lowering, using lowered coil springs cause more alignment problems than you can solve. Then we built Dream Beams. Twin I-Beams In 1965 Ford introduced their “Twin I Beam” suspension, a simple, rugged suspension consisting of a pair […]

Hangers and Shackles

Rear leaf spring shackles are commonly used to “Level” trucks. For those of you who just can’t stand the “stink bug” look of factory stances, the lowering shackle is for you! Typical drop is two inches and fairly simple to install. You simply remove the factory shackle and replace it with a longer drop shackle. […]

Lets Lower a Custom Shortened F250 Super Duty! (RBP) lowers their custom shortened diesel Ford Super Duty RBP, the diesel performance specialists of Corona, CA, built an eye-catching ’04 Ford F-250 Super Duty turbo-diesel show truck by shortening the frame and fitting the vehicle with a short bed. To complete the custom look, the shortened F-250 was lowered by the installation of […]

Power Hungry’s 540HP Diesel F-250

Power Hungry’s 540 HP Diesel F-250 Bill Cohron with Power Hungry Performance takes a diesel powered 2004 Ford F-250 tunes it, gives it well defined abs and develops efficient power from a 6.0 liter Power Stroke Ford Diesel. Power Hungry Performance is all about performance tuning Ford gas and diesel rigs. For more than 12 years Power […]


    Additional information

    Weight 60 lbs