2001 – 2006 Avalanche/Suburban 3 inch front/ 5inch Rear Lowering Kit with Upper Control Arms
Original price was: $1,451.29.$1,410.86Current price is: $1,410.86.
Description
To get serious lowering going on, use Calmax control arms up front which keep the factory spring rate and load on your torsion bars while lowering 3". Drop coils replace the factory springs in the rear for a 5" drop. A rear kit includes brackets and hardware to keep the trailing arms away from the frame and positions the factory sway-bar so it can move freely with out contact by including offset swaybar endlinks!
DJM’s Plus kits add value to your complete suspension kit by including upper control arms. These upper arms are an option for most kits that will help nail down a good alignment and have the bonus of style.
Shocks are Required and included with this kit:
- Replacement parts
Additional information
2000-2006 Tahoe/Yukon, Silverado/Sierra, Suburban/Yukon XL, Avalanche Upper Control Arms for Torsion Bar Front End
| Weight | 20 lbs |
|---|
2001–2006 Avalanche, Tahoe and Suburban Lowering Control Arm (Drivers Side)
| Weight | 25 lbs |
|---|
2001-2006 Avalanche, Tahoe and Suburban Lowering Control Arm (Passengers Side)
| Weight | 25 lbs |
|---|
2001–2006 Avalanche and Suburban 5 inch Rear lowering Coil Springs
| Weight | 20 lbs |
|---|
2000–2006 Avalanche, Tahoe and Suburban Rear Lowering Hardware Kit
| Weight | 15 lbs |
|---|
13.5″ Stem / Loop SuperShock (1315)
| Weight | 3 lbs |
|---|
18.5″ Loop / Loop SuperShock (1800)
| Weight | 3 lbs |
|---|
